Combo Tool Designed To Mount & Demount Tires For Coats

Coats� RC-55 Rim Clamp Tire Changer with RC Robo-Arm�, Air or Electric Drive Motor and Coats� 1300 Direct Drive Wheel Balancer Combo

Coats� RC-55 Rim Clamp Tire Changer with RC Robo-Arm�, Air or Electric Drive Motor

Updated for today's high-speed, general service repair shop, the RC Series will execute day after day, which your shop not only demands, but also deserves. With proven performance through decades of testing, the RC Series Rim Clamp tire changers are built from strong, reliable components that offer more power and longevity for everyday use.

The RC Series will feature two models, the RC-55 and the RC-45

Coats� 1300-2D Direct Drive Wheel Balancer

Legendary reliability with state of the art capability. The Direct Drive Series combines the accuracy and durability of Coats� Direct Drive system with an exclusive set of easy to use balancing features designed to get the job done right the first time, every time.

Powered by Direct Drive^TM
Motor and spindle are combined into a single, pre-balanced assembly that always stays calibrated to zero. This eliminates the need to frequent calibration and delivers a superior balance result.

Static-On-Screen�
Static-on-Screen is an exclusive Coats feature that simultaneously displays both static and dynamic unbalance data. This provides a final quality check to identify any excess residual static unbalance, a leading cause of vibration complaints.

Behind the Spoke
Hides adhesive wheel weights behind the spoke for a clean look on alloy wheels. This keeps the weights hidden from view. Now balancing more complex wheel designs is faster and easier than ever before, plus you maintain a clean look on custom wheels for maximum customer satisfaction.

Direct Tape-A-Weight� Measurement
Helps pinpoint the correct Tape-A-Weight location in alloy balancing modes, improving balancing accuracy and results.

Specifications	RC-55
Operation	1st Loosen Bead, 2nd Mount/Demount
Wheel Handled	Alloy & Steel, Car & Light Truck
Mount / Demount	Swing Arm
Tool Head Offset	Manual
Table Shape	X-Shaped
Wheel Clamping Method	Four Clamps, Air Cylinder Operated
Height of Table to Floor	28.5" (724 mm)
Bead Loosening System	Foot-Controlled Air Cylinder (up to 10.5" wide)
Bead Lifting System	Tire Bar
Air Drive System	1.5HP Air Motor 110-175psi, 15scfm
Electric Drive System	1HP Electric Motor, 110v, 60hz, 15amp
Inflation Pressure Control	Limiter
Assist Arms/Tools	RC-Robo Arm
Clamps	Fixed (2 Position)
Bead Seating Reservoir	Vertical 3.4 Gal. in Tower
Inflation Gauge	60 psi
Air Supply Gauge	0-300 psi
Water Filter/Lubricator	Filter / Lube
Optional Protectors	Plastic Inserts for Metal Mount/Demount Duckhead Tool, Clamp Socks
Min / Max Rim Diameter	6"-24" External 10"-27" Internal
Max Rim Width	10.5" (267mm)
Max Tire Diameter	50" (1270mm)
Rotation Speed	Electric = 1 Speed Air = Variable
Chassis Footprint	35"w x 44"d x 75"h
Weight	620 lbs.

Specifications	1300
Balancing Modes	8
Wheel Diameter Range	8" to 30"
Wheel Width Range	2" - 20"
Maximum Tire Diameter	Up to 44"
Maximum Tire Weight	150 lbs.
Shaft Diameter	40 mm
Interface	LED
Automatic Data Entry	Distance/Diameter
Resolution (Round Off Mode)	0.01 oz
Electrical Requirements	220v / 1ph or 220v / 3ph
Warranty	3 Year Parts, 6 Months Labor
Footprint	78" H x 60" W x 60" D
Shipping Weight	639 lbs.
Part Number	80013002D - 1ph 80013002D01 - 3ph

Coats RC-55 Tire Changer

5 year warranty on transmission
1 year parts warranty
6 month labor warranty

Coats 1300 Wheel Balancer

3 Year Parts
6 Months Labor

Features

Coats RC-55 Tire Changer

RC Robo-Arm� (RC-55 Model Only)
Effortlessly keeps the top bead in the drop center during mounting, allowing technicians to efficiently change difficult wheel applications, such as low-profile wheels and run-flat tires, commonly found on many OE vehicles.

Built-in Bead Sealing Jets
Quickly seal beads while tabletop inflation provides a faster workflow.

High Torque, X-Shaped Turntable
Designed for rigid perimeter support of the wheel. Pedal controls make tire mounting and dismounting easier for technicians, especially when working in high volumes.

Manual Swing Arm
Easily adjusted so that the Coats Duckhead� Mount/Demount Tool is properly fitted to the tire rim. This will reduce the risk of damage when mounting and demounting the tire.

Conveniently Placed Foot Pedals
Provide precise control over every step of the changing process. The pedals are ideally placed for fluid technician movements while mounting and demounting tires.

Inflation Gauge
Easily and accurately inflate from 0 to 60 PSI. With a pressure limiter and easy-to-read gauge, the built-in tire inflation system ensures technician safety and prevents TPMS related comebacks.

Wheel Protection
Available options include bead loosener socks, clamp booties and lift tool protection to prevent metal-to-metal contact that causes scratching or marring.

Coats 1300 Wheel Balancer

Accessories Included

Part Number	Descriptions
*8112098	Small A Cone
*8112099	Medium B Cone
*8112100	Large C Cone
*8112101	Light Truck Back Cone - D Cone
*85607780	Premium Wheel Weight Hammer
*8110542	Small Pressure Cup & Rubber Lip
*8112107	Spring
*8309011	Calipers
*8112103	Hub Nut